£80.91 including v.a.t.
EP Solar MPPT Dual Battery Solar Charge Controller 10A
The EP Solar MPPT Dual Battery Solar Charge Controller is perfect for motorhome and campervan systems where you are wanting to charge your leisure battery and trickle charge your vehicle battery while maximising the suns power, minimising power loss and increasing efficiency by up to 30%.
Kindly note that due to changes in shipping costs we are now charging a larger shipping fee on panels over 1m in length. Please contact us with any queries that you may have and we will be happy to help.
EP Solar MPPT Dual Battery Solar Charge Controller 10A
The EP Solar MPPT Dual Battery Solar Charge Controller is perfect for motorhome and campervan systems where you are wanting to charge your leisure battery and trickle charge your vehicle battery while maximising the suns power, minimising power loss and increasing efficiency by up to 30%.
With a limit protection function on charging current and power in case of excessive PV power and temperature conditions, coupled with extensive electronic protection for overcharge, over discharge and battery polarity, the systems stability is ensured and sustainable.
Additionally, combined with a self-adaptive three-stage charging algorithm, the lifespan of the batteries is prolonged; significantly improving the performance of the system.
Features
-MPPT technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed
-Advanced MPPT control algorithm to minimize the MPPlost rate and lost time
-The wider range of the MPP operation voltage to improve the PV module utilization
-Auto control function of charging power & charging current limitation(BATT1)
-High quality and low failure rate components of ST, TI and Infineon to ensure the product life
-Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life.
-BATT1 type can be set via LED/LCD.
-Product runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).
-100% charging and discharging in operation environmental temperature range.
-LED and LCD dispiay units selectable.
-AES control signal for car refrigerator to avoid energy waste.
-Standard Modbus protocol, and RS485 (5V/200mA) communication port for the customer to expand the application area.
Specification
-BATT1 Rated voltage: 12V/24VDC
-BATT2 Rated voltage: 12V/24VDC Auto
-Rated charge current: 10A
-Battery input voltage range: 8.5～32V
-Max. PV open circuit voltage: 60V
-MPP Voltage Range: (Battery voltage + 2V) ~ 36V
-Rated charge power: 130W/12V; 260W/24V
-Self-consumption: 12mA/12V;8mA/24V (Low-power mode 4mA/12V;3mA/24V)
-Temp. compensation: -3mV/℃/2V (default)
-Working temperature: -20℃～+50℃
-Enclosure: IP33
-Dimensions: 227.2x143x58.1mm
-Weight: 0.8kg
Delivery and Returns
Related products
Out of stock
